Project Definition

• A CompactFlash/IDE Interface for Apple II family of computers
• Support 1 to 13 partitions on 1 or 2 devices under ProDOS and GS/OS
• Dave Lyons' GS/OS driver adds support for large HFS partitions and faster access speeds.
• Onboard EEPROM for SmartPort firmware
• User configurable partition count
• Boot from either device and any partition
• Allow booting ProDOS or GS/OS directly from the Interface card (for a floppy-less system)
• Firmware selectable for 6502 machines(II, II+, IIe) and 65C02 machines(IIe enh, IIe platinum, IIgs ROM1 & ROM3)
NOTE: No DMA or Interrupt support.

Run 6 Product Features	Notes
Standard Apple II form factor Card 3" x 6"	Useable in any slot, (except 3 in IIe enh and IIGS).
Type II CompactFlash socket (IBM MicroDrives works too)	I have tested with SanDisk brand CompactFlash cards. Provides 1 to 13 partitions (32MB each) depending on CF card size and firmware settings under ProDOS 8 ver:2.0.3.
Standard 40 pin IDE header connector	Starting with V2.0 firmware two devices may be used on a single CFFA board.
3 terminal screw type power connection for IDE hard drives	Some drives may exceed the power rating of the Apple's power supply in an already loaded system. I recommend the CF!
Cost: US$99.95 + shipping	Run 6 includes a 16MB CF card per order (not per CFFA card).
User selectable firmware jumper selects between 6502 and 65C02 firmware versions. On card boot menu allows user to select number of partitions per device and which partition to boot from.	All Apple II computers except //c are supported.
8K EEPROM allows 2 versions of firmware	Firmware 0: 65C02 Ver 2.0 Firmware 1: 6502 Ver 2.0