CFFA for Apple II
|
CFFA Downloads
Older CFFA project files:
Project Firmware (EPROM code)
- Version 1.0
65C02 specific firmware for IIe enhanced and IIgs
- Version 1.1Never Released
- Version 1.2
65C02 specific firmware for IIe enhanced and IIgs
- Version 1.0
6502 specific firmware for II+ and IIe
Project CPLD logic source files (Altera/Atmel)
- Version 1.0 Initial Project Release - CompactFlash working only
- Version 1.1 Fix for IDE hard drives. Implements proper ATA timing for IORD & IOWR
- Version 1.2 Fix for using multiple cards and being a good bus citizen.
- Version 1.3 Lets CFFA work in Apple ][+, and IIe. Also provides much better timing margins in all Apple IIs.
- Version 1.4 Supports "3 jumper" hardware fix to allow larger CF cards (and previously incompatiable brands) to work. This version also works with CFFA cards that do not have the 3 jumper fix applied.
- Version 2.0 Supports hardware PCB Version 2.0 Rev B CFFAs. (Not for CFFA versions 1.x or CFFA3000)
- Version 2.1 Supports hardware PCB Version 2.0 Rev B CFFAs. (Not for CFFA versions 1.x or CFFA3000)
Older CFFA Schematics
-
Version 1.2B
Protel 99SE based. Schematic and PCB files that were used to create the production CFFA circuit board.
-
Version 2.0B Schematic PDF
Altium 6 based. Schematic of the current v2.0 production CFFA circuit board.
Third Party software
Dave Lyons' GS/OS Driver for old CFFA cards (not CFFA3000)
- CompactFlash v1.0 in Shrinkit format
- CompactFlash v1.0 in Binascii format
Note: The CFFA card will work under GS/OS without this driver, but
additional volumes and significant speed increase result from using the
driver. You can also download the same GS/OS driver files, including source code, from
Dave Lyons' Web site
CFFA 1.x and 2.x Apple III Driver
- CFIDE_1.40A.zip v1.40 udpated by Dave Schmenk based orignal by Dale Jackson
|