Booting zork

General forum for support issues related to the CFFA3000

Booting zork

Postby hatta » Wed Sep 25, 2013 10:15 pm

I have a .dsk of Zork I that I cannot run with my CFFA 3000 in my IIgs. The Disk II slot is 6, and slot 6 in the system menu is set to "your card". I can boot my prodos user disk image just fine with this setup. But when I assign zork_1.dsk to disk 1 and boot slot 6, all I get are flashing + signs across the screen. The exact same disk image works fine in Kegs.

The CFFA 3000 doesn't seem to like this image. When I assign the disk image to disk 2 on the CFFA, and boot the prodos user disk from disk 1, the filer tells me there's "<no directory>" in slot 6 disk 2. Am I doing something wrong here?
hatta
 
Posts: 7
Joined: Tue Nov 01, 2011 9:25 am

Re: Booting zork

Postby rich » Thu Oct 10, 2013 1:49 pm

You are probably doing nothing wrong.
Can you send me the image file or a link to the image?

One thing you can try is to go into the CFFA3000 settings -> "other settings" and turn off patch DOS RWTS for speed and try again.

Thanks,
-Rich
rich
 
Posts: 188
Joined: Sat Feb 16, 2002 6:00 pm
Location: Wisconsin


Return to CFFA3000 Support

Who is online

Users browsing this forum: No registered users and 21 guests

cron