Converting DSK to floppy

General forum for support issues related to the CFFA3000

Converting DSK to floppy

Postby Hastor » Mon May 12, 2014 10:46 pm

What is the best way to take a DSK image and write an actual floppy from it with the CFA3000? I imagine there must be a way, though it seems I usually can't access virtual disks and real ones at the same time.
Hastor
 
Posts: 6
Joined: Sun May 11, 2014 8:48 pm

Re: Converting DSK to floppy

Postby david__schmidt » Fri May 16, 2014 5:48 am

I don't know if it's the "best," but a reasonable way would be this:

Have the CFFA3000 set up as a virtual Disk II adapter in (say) slot 5, and a real Disk II adapter in slot 6. Mount the .DSK you want to use in CFFA's slot 5, disk 1. Use any disk copy program (COPYA, Copy II+, etc.) to copy from S5D1 to S6D1.

If you're having trouble figuring out how to configure your system to have both real and virtual disks at the same time, have a look at the setup video here:
https://www.youtube.com/watch?v=seIf-_o ... page#t=100
you'll want to review the section at 1:40.
david__schmidt
 
Posts: 158
Joined: Sat Jul 15, 2006 9:32 pm

Re: Converting DSK to floppy

Postby drkenb » Tue Jun 10, 2014 12:47 pm

Hastor wrote:What is the best way to take a DSK image and write an actual floppy from it with the CFA3000? I imagine there must be a way, though it seems I usually can't access virtual disks and real ones at the same time.


I use DiskMaker8 and never had any problems.
drkenb
 
Posts: 8
Joined: Wed Nov 28, 2012 3:18 pm


Return to CFFA3000 Support

Who is online

Users browsing this forum: No registered users and 9 guests

cron