I bought a CFFA-3000 off ebay. I was able to install it and get it working. I downloaded some disk images from the Internet and using ADTPro was able to create a few floppies as well as copy my floppy disc.
Then I used the CFFA 3000 disk Image creator to make a DSK file of my floppy disc.
I saved it to the USB stick and as long as I use disk II emulation, it works, I do not want to leave the usb stick in the machine, so I got a Compact Flash card. I used windows to copy my DSK file from USB to CF then re-installed just the CF into the CFFA-3000,
I reset the Disk II Assignment to the CF version of my DSK file. Reboot.
I get an address and a bunch of data on the screen but the program does not run. If I switch back to the usb stick, it works.
Also after re-formatting the CF and re-writing the MBR with CFFA3000 software, the CFFA3000 no longer sees the files on the CF although the PC does.
Any ideas?
Chris Miller
topfuel388@gmail.com