Page 1 of 1

PostPosted: Sat May 15, 2004 5:06 pm
by rsteinmetz70112
I have been testing my CFFA with a Laser 128 and an Apple ][. I have installed a Rockwell 65c02 in the Apple ][. I have been trying to use the CFFA formated and loaded in the LAser in the Apple][. It ham have ing uneven results. Using Copy ][+ I can view fiels but any attempt to actually run the files results in an error.

I am posting this as information on my experiments.

PostPosted: Sun May 16, 2004 10:57 pm
by rich
Bob,

I have not been having much luck getting any 65C02 to work in my ][+ lately. I know I tried a couple years ago, and seemed to have good initial results. Now nothing seems to work right.
Anyway, if you could do some testing of your ][+ without any CFFA card, just general testing of stuff you would normally do, that would be helpful to see if it is working as expected. Once you have a baseline that always seems to work, then add in the CFFA and see what happens. I think you may find that other stuff doesn't work right with the Rockwell 65C02. At least that has been my experience.

I am interested in anything you find.

PostPosted: Sun May 23, 2004 8:08 pm
by rsteinmetz70112
I have done that testing. The 65c02 seem to work. I am able to load ProDOS 2.0.1 ( the latestin H have. The problems with the CFFA seem to be similar. I have responded to varius threads on the apple usenet groups nad reported my results. If you are interested in mor especific information I will be happy to reun tests. Please aske me what you want to know.