Hello Karl-Heinz,
I responded to your previous email as soon as I read them on (July 22, 2008)
I think we are having a problem between us with email.
Here are the previous emails again...
Let me know if you receive this email
Karl-Heinz,
With the JP3 jumper installed (on) you get the 65C02 firmware v1.2. This is what you would want to run for an Apple IIe enhanced or an Apple IIGS.
With the JP3 jumper removed (off) you get the 6502 firmware v1.0. This is what you would want to run on a Apple II, Apple II+ or Apple IIe.
The the 3 wire fix was for run 1, 2 and 3. Your run 4 board already has that change included.
Any boards from runs 4 or run 5, can be updated with the new version 2.0 firmware. You currently have version 1.2 and version 1.0.
Check out my web site for information about what features version 2.0 firmware has. Please note, I have having internet trouble and it won't be fixed until friday.
Thanks,
Rich
Karl,
Here is a link to the files I send out with every CFFA run 6 order. It has the new flash utility to help you update your CFFA card and the new firmware. The manual has a special section that describes how to go through the procedure. The upgrade procedure is long but another customer has tried it and told me it works. Please download the file and look in the manual for help
https://dreher.net/projects/CFforAppleII ... _CDROM.zip
-Rich
Karl,
Also, in the file you can download, there is a CF card image (16MB) which you can program into a CF card using Ciderpress. This has the flash utility: CFFA.UTIL already on the image. This should make upgrading your cards easier.
-Rich