CFFA for IIc

This forum is for the discussion of the CFFA for Apple II project.

Moderator: rich

CFFA for IIc

Postby gsmcporet » Sun Mar 11, 2007 1:34 pm

Hi Rich and all,

I was tooling around the net and I happened to come across an article for the Laser 128. As I read through the article, it mentioned an Expansion Box which could hold two Apple II cards. It also had photographs of the box. The problem was that it uses a Centronics Connector.

I thought maybe the connector could be changed so that the box could be connected to the IIc disk drive port and then a CFFA card could be used.

I figured I'd toss that out to all and see what everyone thinks. :)

Best Regards,
Steven
gsmcporet
 
Posts: 30
Joined: Wed Apr 13, 2005 9:53 am
Location: Annapolis, Maryland

Postby gsmcporet » Sat Jun 16, 2007 8:22 pm

Hi Rich and all,

I found one! An expansion box for a Laser 128. Now, unless you've actually seen one of these you would not beleive what the interface is.

It's a blade connector that fits into an expansion slot in an Apple II, II+, or IIe. There is a slot built into the left side of the 128 to accept it, and it leads into the motherboard.

Now what I need are suggestions as to how to convert this into an expansion box for a IIc.

I'm going to get pictures up here soon.

Any help is greatly appreciated.

Steven
gsmcporet
 
Posts: 30
Joined: Wed Apr 13, 2005 9:53 am
Location: Annapolis, Maryland


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron