I would also like to thank Rich for the CFFA card! I love it! Worked great right out of the box w/ my seagate 1.2g ide drive. Only problem occured was when I had the pin 1 cable to drive wrong.. all I had to do is turn it around and boot - recognized first thing and formatted - the rest was history.
I would recommend to anyone BUY ONE!
CFFA
Moderator: rich
2 posts
• Page 1 of 1
by h.katz » Mon Jun 03, 2002 10:26 am
I've been using my CFFA for about a week now with a Sandisk 128 meg, and other than the partition #4 formatting problem (now solved), the card is working fine.
Thought I'd mention that over the weekend I desoldered the LED from the card, put it on the end of 2 feet of 24 gauge 2-conductor wire, and placed it between my existing floppy drives. Works well, and I can now see card access with the top of my Apple //e back on. :smile:
Later........Howard
Thought I'd mention that over the weekend I desoldered the LED from the card, put it on the end of 2 feet of 24 gauge 2-conductor wire, and placed it between my existing floppy drives. Works well, and I can now see card access with the top of my Apple //e back on. :smile:
Later........Howard
- h.katz
- Posts: 22
- Joined: Tue May 28, 2002 6:00 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 27 guests