Suggestion for modification

This forum is for the discussion of the CFFA for Apple II project.

Moderator: rich

Suggestion for modification

Postby a2retro » Sat May 27, 2006 6:42 am

Hi Rich,

I was thinking it might be better if the IDE header was angled vs straight as that would allow cable attachement without interfereing with the ajacent slot if a long card was used.

I am contemplating buying a 3rd CFFA card - is it possible to get one made this way or to have you leave the header off and I would solder my own on?

Thanks

Glenn
a2retro
 
Posts: 15
Joined: Wed May 24, 2006 5:01 pm
Location: Ajax, ON, Canada

Re: Suggestion for modification

Postby a2retro » Tue Oct 24, 2006 11:40 am

[quote="a2retro"]Hi Rich,

I was thinking it might be better if the IDE header was angled vs straight as that would allow cable attachement without interfereing with the ajacent slot if a long card was used.

I am contemplating buying a 3rd CFFA card - is it possible to get one made this way or to have you leave the header off and I would solder my own on?

Thanks

Glenn[/quote]

Hi Rich, would you consider my request or make me a card without the ide header soldered on?

Glenn
a2retro
 
Posts: 15
Joined: Wed May 24, 2006 5:01 pm
Location: Ajax, ON, Canada

Re: Suggestion for modification

Postby rich » Tue Oct 24, 2006 9:20 pm

Glenn,

Well, that is a bit of a problem. All my boards are machine assembled
nowadays. I will see if I can get the assembler to leave on off if they are
not already finished.
rich
 
Posts: 188
Joined: Sat Feb 16, 2002 6:00 pm
Location: Wisconsin


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron