dreher.net

Hi Rich,

I was thinking it might be better if the IDE header was angled vs straight as that would allow cable attachement without interfereing with the ajacent slot if a long card was used.

I am contemplating buying a 3rd CFFA card - is it possible to get one made this way or to have you leave the header off and I would solder my own on?

Thanks

Glenn

[quote="a2retro"]Hi Rich,

I was thinking it might be better if the IDE header was angled vs straight as that would allow cable attachement without interfereing with the ajacent slot if a long card was used.

I am contemplating buying a 3rd CFFA card - is it possible to get one made this way or to have you leave the header off and I would solder my own on?

Thanks

Glenn[/quote]

Hi Rich, would you consider my request or make me a card without the ide header soldered on?

Glenn

Glenn,

Well, that is a bit of a problem. All my boards are machine assembled
nowadays. I will see if I can get the assembler to leave on off if they are
not already finished.