by rich » Sat Jan 29, 2011 1:31 am
Yes. There is a header on the board that will allow a cable/board with 2 switches and 2 LEDs to be connected to the CFFA3000.
This will allow the user to signal a disk switch for two disk drives.
Currently the plan for how you will specify what disks to switch through has only been vaguely defined.
You will create a directory like say: PrinceOfPersia and inside that directory you will place all of the images that can be switched through.
So if you select that directory for Disk1 each time you press the button you will toggle to the next disk image in that directory.
This feature has not been coded yet so this is subject to change. I have tested the LED/switch interface and it is working.
If I make a switch board, it will be sold separately for a nominal charge.
-Rich