how to install System 6.0.1 from disk images to CFFA3000 CF

General forum for non-support issues

Moderator: rich

how to install System 6.0.1 from disk images to CFFA3000 CF

Postby robbo007 » Wed Jul 17, 2019 12:21 pm

Hi all,

Ive created a 128mb .PO disk image with my CFFA3000 on my CF and I'm trying to install System 6.0.1 via floppy images to this .PO file. The installer does not detect the image .po file I created in the install process. Any ideas on the best way to do a fresh install of System 6.0.1 on my Apple IIGS.

Thanks,

Rob
robbo007
 
Posts: 12
Joined: Wed Feb 12, 2014 3:05 am
Location: Valencia, Spain

Re: how to install System 6.0.1 from disk images to CFFA3000

Postby robbo007 » Mon Jul 22, 2019 3:28 pm

I was missing the Initialise phase of the newly created .po file. All sorted.
robbo007
 
Posts: 12
Joined: Wed Feb 12, 2014 3:05 am
Location: Valencia, Spain

Re: how to install System 6.0.1 from disk images to CFFA3000

Postby Char27 » Sun Aug 18, 2019 8:35 am

Fyi - you can also find some decent starter images (fully installed IIGS) here.

https://www.whatisthe2gs.apple2.org.za

It's towards the bottom of the page
Char27
 
Posts: 35
Joined: Wed Feb 25, 2009 10:09 pm
Location: Chicago, IL (north of)

Re: how to install System 6.0.1 from disk images to CFFA3000

Postby roughana » Thu Oct 17, 2019 4:43 am

Refer to this thread for the How To:
viewtopic.php?f=16&t=557
roughana
 
Posts: 18
Joined: Fri Apr 25, 2014 8:41 pm

Re: how to install System 6.0.1 from disk images to CFFA3000

Postby Char27 » Thu Oct 17, 2019 8:58 am

roughana wrote:Refer to this thread for the How To:
viewtopic.php?f=16&t=557


I had forgotten about that post from David Schmidt. His instructions are always clear and accurate.

For reference, here is his YouTube channel with CFFA3000, ADTPro and other Apple2 related videos.
https://www.youtube.com/user/retrorerun

I originally used his ADTPro app to bootstrap my II+ using tape drive connector (audio in port) when I first pulled it out of storage (2005-2006 I think). I had no boot disks (another box) at the time so this was how I got up and running.
Char27
 
Posts: 35
Joined: Wed Feb 25, 2009 10:09 pm
Location: Chicago, IL (north of)


Return to CFFA3000 General Discussion

Who is online

Users browsing this forum: No registered users and 15 guests

cron