Karateka (works) not working
Posted: Mon Oct 15, 2012 10:48 pm
I have most all programs running on the cffa 3000, but the karateka I have (cracked by the racketeers) doesn't work. The crack screen loads, you hit a key, a character 7 shows in the upper right hand corner, and the speaker beeps a low tone. Then the crack screen displays again.
My config:
Platinum Apple //e
Slot 0: 80col/64k (late model)
slot 1: Grappler + (dont really need)
slot 2: Super Serial Card
slot 3: Clone z80 board for CP/M
slot 4: Mockingboard 1a
slot 5: Duodisk drive controller
slot 6: (nothing, cffa disk II emu)
slot 7: cffa 3000
The CFFA switches are all off.
Fast RWTS is off.
Im placing karateka in slot 6 disk 1.
I boot to the "hd" prodos from the cffa/usb using prosel/8.
then exit to BASIC and type pr#6.
Anything I might be doing wrong?
Kevin
This program previously worked with the cffa in my old IIe (non-enhanced).
My config:
Platinum Apple //e
Slot 0: 80col/64k (late model)
slot 1: Grappler + (dont really need)
slot 2: Super Serial Card
slot 3: Clone z80 board for CP/M
slot 4: Mockingboard 1a
slot 5: Duodisk drive controller
slot 6: (nothing, cffa disk II emu)
slot 7: cffa 3000
The CFFA switches are all off.
Fast RWTS is off.
Im placing karateka in slot 6 disk 1.
I boot to the "hd" prodos from the cffa/usb using prosel/8.
then exit to BASIC and type pr#6.
Anything I might be doing wrong?
Kevin
This program previously worked with the cffa in my old IIe (non-enhanced).