I have a .dsk of Zork I that I cannot run with my CFFA 3000 in my IIgs. The Disk II slot is 6, and slot 6 in the system menu is set to "your card". I can boot my prodos user disk image just fine with this setup. But when I assign zork_1.dsk to disk 1 and boot slot 6, all I get are flashing + signs across the screen. The exact same disk image works fine in Kegs.
The CFFA 3000 doesn't seem to like this image. When I assign the disk image to disk 2 on the CFFA, and boot the prodos user disk from disk 1, the filer tells me there's "<no directory>" in slot 6 disk 2. Am I doing something wrong here?