by polyex » Thu Jan 02, 2014 2:07 pm
My CFFA 3000 is inside an Apple IIe enhanced and is using physically using slot 7 and virtually #6 for floppy drives with 3 smart ports on. I have 2 other cards in the machine, an Apple 80 col on slot #3 and a Mockingboard on slot#4. I left Taipain running for about 2 hours (at the title screen) and the Apple dropped to the monitor. If I restart by toggling the power, the CFFA 3000 will start to boot a hard drive image, but crash to monitor. If I remove the CFFA 3000 I can boot to my floppy drive (Slot #5) and the computer behaves normally. If I let things cool down a bit by keeping the computer off for 10 minutes, everything seems to start working again. I am running 3.1 firmware. This has happened with other programs as well when they are left running (buzzard bait is another).