Hello Members
I have an Apple 2E Platinum with the CFFA3000 installed in slot 7 and the virtual disk II in slot 5. My CF card has ProDos images and it boots from these images after that beautiful ... Be-Bop ... sound. It seems to run fine for the applications that I have so far installed. My problem is the USB port. I used "CiderPress" to copy disk II images to the USB including DOS 3.3, CP/M files and even ProDos applications. It will not boot up when the USB is installed. I can only access the card itself when the USB is removed at boot up? This is perplexing since originally I got that beautiful ... Be-Bop ... Be-Bop ... on boot up before I moved disk images from "CiderPress" as the system apparently accesses both the CF card ... Be-Bop ... then the USB ... Be-Bop. Now I get continuous beeping sounds and no boot up until I remove the USB stick.
Thanks for any help, SteveS