toinet wrote:Dear All,
Please forgive me but my message will be written en français ;-)
Par l'entremise de Rich, nous savons que quinze utilisateurs français ont acheté une carte CFFA3000 (et probablement plus de la version précédente), pourriez-vous vous faire connaître sur ce forum et me joindre sur mon adresse directory chez brutaldeluxe point fr (qui va bien) ?
Sont déjà identifiés (par ordre alphabétique) : Antoine, Antony, Arnaud, Didier, François, Kamel et Olivier.
Ce serait sympa que l'on se retrouve tous ensemble.
Antoine Vignau
Brutal Deluxe Software
http://www.brutaldeluxe.fr/
Hello ! This is Didier speaking from Auch (France)
Un grand Merci à Rich et Antoine d'avoir relayé aussi vite mes préoccupations. En effet, je n'arrive pas à faire booter ma CF sur mon ][ Europlus... Pourtant, je connais la machine (j'ai eu mon mon premier ][+ en nov. 82), mais j'ai du mal avec la CFFA et ses nombreux paramètres. Bon, j'ai tout (?) essayé, je rappelle mon problème avec le mail que j'ai fait à Rich et sa réponse (j'ai la flemme de retraduire!):
On 12/22/2011 12:13 PM, cleesy32 wrote:
> Hello Rich,
>
> Despite your help, I couldn't succeed to boot on CF, neither from raw partition, nor from disk image…
>
> It took me a long time to understand the slot configuration and after a lot of slot-swapping, I finally put disk ][ controller in #4 and CFFA in #5 (with CFFA in #7, I got "Relocation/configuration error" from ProDos). So, I can now boot disk images from USB, located in pseudo slot #6 (physically free).
>
> [Let me say I first removed all other cards in my system, except, of course, the language card.]
>
> I'm still looking for a solution to boot on ProDos 1.9 from the CF card in the "old way" mode (raw partition).
> The "Autoboot older Apples" is not that obvious: with ProDos 1.9 (last version ][+ 64K compatible) I shouldn’t have to set it on Yes, but who knows. It just seems that with Yes, it boots directly on USB, logically disabling Smartport
>
> So, here is how I did. Where am I wrong ?:
> - tested my 128 MB CF card
> - format the CF on my Mac in FAT32+MBR (one partition)
> - made from scratch with CiderPress a 32MB image with ProDos 1.9 and basic.system
> - verified image booting on AppleWin and Virtual ][
> - transferred this image with CiderPress "Volume copy" onto the CF
> - seen "CF: raw partition" in CFFA main screen and [PART#1] in smartport windows: seems ok
> - set no other smartport assignment
>
> Copy ][+ sees the volume in S5D1, verifies OK, but Catalog hangs. And no booting: at times system hangs up, or on first Prodos screen, or crashes into monitor, or boots from floppy or USB, pretty erratic…
>
> Thanx for your help.
> Didier
Didier,
I suspect that this is a hardware issue with your Apple II. Or some incompatibility with the CFFA3000 and your Apple II. When I say your Apple II, I mean your specific machine, not your model in general.
Is there another Apple II you could try the card in. I think you are doing everything correctly.
I will forward your email address to a few others in France.
Thanks,
-Rich
Vous avez compris que je n'arrive pas à booter sur la CF et que Rich suspecte un pb matériel...
J'ajoute que j'ai cet Apple depuis un an, sans problème. Je l'ai passé à une batterie de tests (Apex, XPS, Mecc, etc.). A ce jour, aucune défaillance matérielle.
Si vous avez mis la CFFA dans votre ][+ avec succès, je suis très intéressé par votre avis et votre config.
Encore une fois merci à Rich d'avoir été à mon écoute. Ca, c'est du SAV ! Mais je sais que je peux aussi compter sur la communauté des all-time Apple fans.
J'irai aussi faire un tour sur le forum Hackzapple (merci Antony).
Greetings and Merry Christmas
DidierApple User depuis 1980 (][+, //e, IIGS)
iMac i7-2,8 et aussi Mac SE/FDHD 2/20 Mo - Apple ][ 64k Europlus (8127) + SSC-80col-2 Disks II-moniteur //
Apple /// 256k-ProFile-Monitor ///Membre actif de
Silicium"Les raisonnables ont duré, les passionnés ont vécu"